TP-XXL Special Ops
$679.95 NZD
Closable mid-sized tool pouch in a new black and Hi-Viz yellow color scheme. It is identical to other TP-XXL bags and includes integral side-mounted padded pockets for separate meter or tool storage.
The TP-XXL SPECIAL OPS is a closable mid-sized tool pouch in a new black and Hi-Viz yellow color scheme. It is identical to other TP-XXL bags and includes integral side-mounted padded pockets for separate meter or tool storage. The TP-XXL SPECIAL OPS also features our proprietary V-SWAP™ system of interchangeable panels so you can create multiple configurations based upon your needs. The TP-XXL SPECIAL OPS edition comes with the V-SWAP Front Panel, V-SWAP Tool Panel, and the V-SWAP 2-Bit @ 4-Bit Pocket Panels. Additional panels are available and sold separately.
Download a Spec Sheet| PRODUCT SPECIFICATIONS | Height (H): 15" (38cm) Width (W): 15" (38cm) Depth (D): 8" (20.5cm) Handle Height (HH): 22in/56cm Weight (empty): 7lbs/3.25kg Internal Volume: 710in3/12L Max Payload: 30lbs/14kg Tablet Pocket Dimensions: 11"H x 9"W x 1"D |
|---|---|
| MAXIMISED TOOL STORAGE CAPACITY | 47 available pockets Special Ops color scheme V-SWAP™ removable tool pocket panel system Includes rear tablet pocket & 2 padded meter pockets “Hang-up” hook – accessible while open and closed Over-molded rubber grip Padded shoulder strap YKK® zippers High Impact Polypropylene plastic base |
| OTHER FEATURES | Warranty: 5 Years (see Veto warranty terms and conditions) |
Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
PROTECT THE ZIPPERS FROM SHARP OBJECTS AND/OR EXCESSIVE HEAT
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
DON'T OVERSTUFF THE BAG
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed…proceed with caution!
Related products
Tech
Tech
Laptop
Tool Pouches
