Tech Pac Wheeler Blackout
$1,049.95 NZD
The TECH PAC WHEELER BLACKOUT is a rolling version of the best-selling TECH PAC BLACKOUT backpack tool bag with an all-black colour scheme.
In Stock
The TECH PAC WHEELER BLACKOUT is a rolling version of the best-selling TECH PAC BLACKOUT backpack tool bag with an all-black colour scheme. This wheeled backpack includes new premium padded backpack straps that are completely removable. This makes stowing the backpack straps easier and allows you to choose whether the bag can function as a backpack or not. The TECH PAC WHEELER BLACKOUT also features the V-SWAP system. Includes the Tool Panel (included and mandatory) and Meter Panel. Other panels sold separately.
Download a Spec Sheet| PRODUCT SPECIFICATIONS | Height: 53cm Width: 41cm Depth: 28cm Weight: 7.5kg |
|---|---|
| MAXIMIZED TOOL STORAGE CAPACITY | 48 interior and exterior tool pockets All-black color scheme Removable & stowable backpack shoulder harness Quick release metal hasp supports load & allows easy access to rear storage bay V-SWAP™ removable tool pocket panel system with alternate tool panels available & sold separately Waterproof Polypropylene plastic base with integral wheels and trolley system Exterior manifold gauge & hose storage pocket Thermoformed cushioned EVA back pad Metal YKK® locking zippers 8" Electrical tape strap Interior Grey pockets for better visibility Magnetic screw catcher |
| OTHER FEATURES | Warranty: 5 Years (see Veto warranty terms and conditions) |
Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
PROTECT THE ZIPPERS FROM SHARP OBJECTS AND/OR EXCESSIVE HEAT
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
DON'T OVERSTUFF THE BAG
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed…proceed with caution!
Related products
Tech
Tech
Tech
Tech
