Tech Pac MC Special Ops
$699.95 NZD
Compact backpack in black with Hi-Viz yellow accents, designed for techs who need to carry a minimum amount of tools and test meters hands-free for service calls and minor installs.
The NEW VERSION of the TECH PAC MC SPECIAL OPS is a compact backpack in black with Hi-Viz yellow accents, designed for techs who need to carry a minimum amount of tools and test meters hands-free for service calls and minor installs. The bag NOW FEATURES Veto Pro Pac’s proprietary V-SWAP™ system of interchangeable panels and includes the Tool Panel and Meter Pocket Panel. Additional panels are sold separately, allowing alternative configurations to enable tool, gear, or job-specific storage solutions.
Download a Spec Sheet| PRODUCT SPECIFICATIONS | Height (H) : 17” (43cm) Width (W): 12" (30.5cm) Depth: 9" (23cm) Handle Height (HH): 19" (48cm) Weight (empty): 8 lbs/3.5 kg Internal Volume: 1100in3/18L Max Payload: 35lbs/16kg |
|---|---|
| MAXIMISED TOOL STORAGE CAPACITY | V-SWAP™ removable tool pocket panel system Includes tool & meter panels; alternate V-SWAP™ panels available and sold separately SPECIAL OPS color scheme Interior magnetic screw catcher Thermoformed cushioned EVA back pad Waterproof Polypropylene plastic base Quick release metal hasp supports load & allows easy access to rear storage bay YKK® zippers |
| OTHER FEATURES | Warranty: 5 Years (see Veto warranty terms and conditions) |
Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
PROTECT THE ZIPPERS FROM SHARP OBJECTS AND/OR EXCESSIVE HEAT
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
DON'T OVERSTUFF THE BAG
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed…proceed with caution!
Related products
Backpack Tool Bags
Tech
Everyday Carry
Tech
