TECH OT-MD Blackout
$539.95 NZD
The TECH OT-MD BLACKOUT is an all black compact open-top tool bag with an extra wide body.
In Stock
The TECH OT-MD BLACKOUT is an all black compact open-top tool bag with an extra wide body. The TECH OT-MD BLACKOUT features a center storage space that houses a repositionable insert box with a magnetic lid that can be used as a parts tray.
Sporting our V-SWAP™ system, the TECH OT-MD BLACKOUT comes with a 5X3 Pocket Panel and 4 x 4 Pocket panel for quick and easy access to your tools, which can be swapped out with other panels for customization of storage layouts. Added depth increases the capacity and stability of this bag. Additional insert boxes and V-SWAP™ panels are available and sold separately.
NOTE: THIS BAG COMES WITH THE 5X3 POCKET PANEL AND THE 4X4 POCKET PANEL. YOU DO NOT HAVE TO PURCHASE ANY ADDITIONAL PANELS FOR THE BAG TO COME WITH THESE PANELS, THOUGH YOU MAY PURCHASE ADDITIONAL PANELS TO OFFER A VARIETY OF CONFIGURATIONS.
Download a Spec Sheet| PRODUCT SPECIFICATIONS | Height: 12" (30.5cm) Width: 12.5" (32 cm) Depth: 12" (30.5cm) Weight (empty): 8lbs/3.6kg Internal Volume: 720in3/11.8 L Max Payload: 35lbs/16kg |
|---|---|
| MAXIMIZED TOOL STORAGE CAPACITY | Up to 33 available pockets V-SWAP™ removable tool pocket panel system Comes with 5X3 pocket panel and 4 x 4 Pocket panel 1 movable plastic partition & 1 magnetic lid and insert box Holds up to 3 removable insert boxes Exterior utility pocket Detachable padded shoulder strap Waterproof Polypropylene Base for moisture and abrasion protection Blackout Colorway |
| OTHER FEATURES | Warranty: 5 Years (see Veto warranty terms and conditions) |
Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
PROTECT THE ZIPPERS FROM SHARP OBJECTS AND/OR EXCESSIVE HEAT
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
DON'T OVERSTUFF THE BAG
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed…proceed with caution!
Related products
Tech
Tech
Hi-Viz Toolbags
