SR-LC
$99.95 NZD
The SR-LC is a compact tool roll designed to store a full socket set, including socket wrenches and extensions. It features two rows of 15 elastic loops of varying sizes to hold sockets, with tubing rails to keep them secure, and two center rows of 5 elastic loops for wrenches and extensions. The SR-LC functions as a standalone tool roll and is compatible with the TR-LC.
Available on back-order
The SR-LC is a compact tool roll designed to store a full socket set, including socket wrenches and extensions. It features two rows of 15 elastic loops of varying sizes to hold sockets, with tubing rails to keep them secure, and two center rows of 5 elastic loops for wrenches and extensions. The side flaps fold inward to prevent items from falling out. Additional features include an external zippered compartment for small items, a carrying handle, and a Velcro loop for attachment to the TR-LC. The SR-LC functions as a standalone tool roll and is compatible with the TR-LC.
Download a Spec Sheet| PRODUCT SPECIFICATIONS | ROLLED DIMENSIONS: Height: 15.25cm Width: 33cm Depth: 5cm Weight (empty): 0.4 kg UNROLLED DIMENSIONS: Width: 33cm Depth (D): N/A Weight (empty): 0.4 kg |
|---|---|
| MAXIMIZED TOOL STORAGE CAPACITY | Highly durable 600D polyester external construction Water-resistant and wipeable internal construction External carrying handle External zippered pocket Adjustable dual-buckle fastening system Accommodates both SAE (5/32in up to 3/4in) and Metric (4mm up to 17mm) sockets 2 rows of 15 elastic socket storage loops of various sizes 2 rails of tubing for added security of sockets when stored in the loop 2 centre rows of 5 elastic loop for storing socket wrenches and extensions Flaps along the perimeter that fold inward to prevent items from falling out External Velcro loop for attaching to the inside of the TR-LC YKK® zippers |
| OTHER FEATURES | Warranty: 5 Years (see Veto warranty terms and conditions) |
Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
PROTECT THE ZIPPERS FROM SHARP OBJECTS AND/OR EXCESSIVE HEAT
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
DON'T OVERSTUFF THE BAG
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed…proceed with caution!
