SC45
$219.95 NZD
Small, semi-rigid, multi-functional pouch designed to attach to a waist belt or the side of a tool bag using its wire belt clip or carabiner. This pouch combines a phone holster, Leatherman pouch, tool pouch, and EDC pouch into one.
In Stock
The SC45 is a small, semi-rigid, multi-functional pouch designed to attach to a waist belt or the side of a tool bag using its wire belt clip or carabiner. This pouch combines a phone holster, Leatherman pouch, tool pouch, and EDC pouch into one. The front features a removable tool pouch with two main pockets for a screwdriver or pliers, a pair of thru-pockets, pencil pockets, a stainless steel tape measure clip, and an electrical tape strap. Inside, there is a padded wall with an elastic neoprene pocket to accommodate any size phone, along with an elastic band for storing a notepad. The pouch also includes a removable 3-pocket V-SWAP™ panel for storing a pocket knife, penlight, and pen or pencil.
OC45 Panels are compatible with the SC45.
Download a Spec Sheet| PRODUCT SPECIFICATIONS | Height (H): 8.5" / 21.5 cm Width (W): 5.5" / 14 cm Depth: 4.5"/ 11.5 cm Weight (empty): 1.25 lbs/ 0.6 kg Internal Volume: N/A Max Payload: 10lbs/ 4.5 kg |
|---|---|
| MAXIMISED TOOL STORAGE CAPACITY | Semi-rigid exterior with moisture resistant back Removable tool pouch with 6 pockets, stainless tape measure clip, 2 D-rings, and magnetic flap for securing to a waist belt or trouser pocket Front external sleeve pocket for attaching removable tool pouch and sized for storing a smart phone Included Double-Gated Carabiner for hanging case while open or closed Wire-formed & nylon plastic belt clip V-SWAP™ removable tool pocket panel with 3 internal pockets designed to store a pocket knife, penlight, an pen or pencil Internal smart phone storage pocket with extra padding and anti-scratching material Internal elastic strap for storing a small notepad YKK® zippers |
| OTHER FEATURES | Warranty: 5 Years (see Veto warranty terms and conditions) |
Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
PROTECT THE ZIPPERS FROM SHARP OBJECTS AND/OR EXCESSIVE HEAT
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
DON'T OVERSTUFF THE BAG
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed…proceed with caution!
Related products
Tech
Accessories
Tool Pouches
Tech
