NORWALK TECH CASE
$139.95 NZD
The NORWALK TECH CASE organises your technology accessories. Made from recycled, water-resistant polyester, it features elastic loops for charger cords, a structured compartment for a power bank, loops for your writing utensils, and a zippered compartment for larger items.
Available on back-order
The NORWALK TECH CASE organises your technology accessories. Made from recycled, water-resistant polyester, it features elastic loops for charger cords, a structured compartment for a power bank, loops for your writing utensils, and a zippered compartment for larger items. A removable pouch and a removable custom double-gated carabiner provide added versatility (additional Carabiners available for purchase below). With Hypalon touchpoints, mesh pockets, and a clamshell design, the NORWALK TECH CASE is the perfect solution for keeping your items secure and easy to find.
Download a Spec Sheet| PRODUCT SPECIFICATIONS | Height: 46cm Width: 30.5cm Depth: 18cm Weight (empty): 0.34kg |
|---|---|
| MAXIMIZED TOOL STORAGE CAPACITY | Recycled water resistant 600D waxed polyester Clamshell opening for easy access 4 elastic charger cord loops Gusseted pocket optimized for storing a large power bank 3 pen/pencil/stylus loops Zippered compartment that’s great for storing charging blocks, large cords, etc. 2 stretch mesh pockets Hypalon touch points for easy pocket access Removable tech pouch with 2 zippered compartments and Hypalon tabs for attaching a carabiner Removable custom VETO double-gated carabiner Low profile grip handle Reflective logo for added visibility |
| OTHER FEATURES | Warranty: 5 Years (see Veto warranty terms and conditions) |
Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
PROTECT THE ZIPPERS FROM SHARP OBJECTS AND/OR EXCESSIVE HEAT
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
DON'T OVERSTUFF THE BAG
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed…proceed with caution!
Related products
VETO GO
VETO GO
VETO GO
VETO GO
